Combo HFMx M-LINK with RX-5 light M-LINK (RX-7 shown)
If you frequently switch between 35 / 40 ... MHz and 2.4 GHz with the same transmitter, or wish to use an earlier transmitter on the 2.4 GHz band, then the HFMx M-LINK external module is the right solution for you. The module simply plugs into the transmitter’s Trainer socket, and can either be fixed to the transmitter itself or installed in a transmitter tray. No modifications of any kind are required to the transmitter, and the conversion takes just a few moments to complete. The change-over switch on the HFMx M-LINK module provides a convenient means of switching between the different frequency bands - e.g. 35 MHz and 2.4 GHz - at any time.
Specification:
Frequency range 2.4000 GHz … 2.4835 GHz
Limited frequency range 2.4000 GHz … 2.4540 GHz
Transmission type 2.4 GHz FHSS M-LINK System
MULTIPLEX-LINK Frequency Hopping Spread Spectrum
Transmitter output 100 mW EIRP
Current drain approx. 50 mA
Temperature range -15°C … +55°C
Dimensions (L x W x H) approx. 83 x 52 x 11 mm (case)
Weight approx. 65 g
The plus-points:
• Fast, simple, change-over from 35, 40 ... MHz to 2.4 GHz operation using the switch mounted directly on the HFMx module
• Change-over switch for selecting normal or restricted frequency band (“France mode”)
• Change-over switch for selecting 14 ms (Fast Response) or 21 ms servo frame rate
• Activating button on the module itself for selecting binding mode and range check mode
• LED status indicator
