Extension module to 13/16 for PROFImc 3000/4000
If you install the HFM3 M-LINK 2.4 GHz RF module it makes sense to expand your PROFI mc 3010 or 3030 transmitter to thirteen fully proportional servo channels, or your PROFI mc 4000 to sixteen fully proportional channels. Large-scale aircraft often feature a large number of auxiliary working systems, and pilots of such models will certainly appreciate this advance.
To expand your transmitter you need the 13-channel / 16-channel expansion module for the PROFI mc 3000 / 4000 - and you’re ready to go: plug the circuit board into the HFM3 M-LINK RF module, and connect up to four additional controls to the board. Control elements can be two-position switches, three-position switches or rotary proportional knobs. These can be installed in the transmitter in the standard installation wells at front right and left, adjacent to the screen. If your transmitter is a PROFI mc 3010 / 3030, the expansion will give you channels 1 to 9 plus the auxiliary channels 10 to 13. If you have a PROFI mc 4000, channels 1 to 12 are available plus the auxiliary channels 13 to 16. Please note that these four additional channels cannot be configured or adjusted using the transmitter’s software.
