EASY GLIDER PRO
ELECTRIC RR
£159.99!
| Item | Qty | Price | ||||||
| ||||||||
ACHTUNG ...
DOGFIGHTER RR!
NOW IN STOCK!!
£169.99
And, check this out!
M-LINK Modules for JR/Graupner transmitters!!
NOW IN STOCK
- £59.99 with Rx!!!
Now Supplying MKS Wing Servos!
More M-LINK SENSORS!
Another giant leap!!
Telemetry Starter Set incl 4 sensors, Multimate and leads
£175
NOW IN STOCK!
NEW MULTIcont BL-20SD
£27.50
M-LINK Telemetry Display
NOW AVAILABLE!!
JR & Graupner fit M-LINK modules
Shared specification: Frequency range: 2.4000 GHz – 2.4835 GHz Transmission mode: 2.4 GHz FHSS M-LINK system (Frequency Hopping Spread Spectrum) Transmitter power: 100 mW EIRP Temperature range: - 15°C - + 55°CThese retro-fit modules make it possible for Graupner/JR pilots to exploit the proven and successful MULTIPLEX 2.4 GHz FHSS M-LINK technology. Audible warning of low receiver battery voltage Each module is equipped with a buzzer which, in conjunction with a telemetry-capable M-LINK receiver, warns the user of dangerously low voltage at the receiver battery.Simple conversion Greatly extended transmitter operating time Update capability Telemetry capability
Many Graupner/JR transmitters can be converted to the MULTIPLEX M-LINK system, enabling them to work with the whole range of M-LINK receivers and the MSB telemetry system; it is also possible to expand mc-series transmitters by four channels, like the MULTIPLEX PROFI series.
Naturally all three RF modules include the proven “Fast Response” and “France mode” select facilities.
Many Graupner/JR transmitters can be converted to the MULTIPLEX M-LINK system, enabling them to work with the whole range of M-LINK receivers and the MSB telemetry system; it is also possible to expand mc-series transmitters by four channels, like the MULTIPLEX PROFI series.
Naturally all three RF modules include the proven “Fast Response” and “France mode” select facilities.
Just plug in and fit the retaining screws; no soldering required.
The RF modules have a lower current drain.
HFMG modules can be updated using the “Data-Manager” PC program (available free from www.multiplex-rc.de). You will also need a USB PC lead, UNI (# 8 5149).
All retro-fit modules feature a socket for the Telemetry Display, # 4 5182. If you use a telemetry-capable M-LINK receiver and MSB-compatible sensors, this unit can display up to sixteen telemetry values from your model.
« Back
