|
The
high-performance electric glider made of ELAPOR®
 
Available
Now!
£ 119.99 
Power
set...
£ 109.99
The EasyGlider was
the first step for many modellers into the world of model gliding and
thermals, and now we present the logical development and next step: the
Cularis.
-
• Minimal
cost
-
• Minimal
building effort
-
• Minimal
risk of breakage thanks to robust ELAPOR® foam
-
• Four-flap
wing: camber-changing flaps and butterfly (crow) / landing aid function
-
• Optional
electric power set with ample power
-
• Broad
performance spectrum, including aerobatics and thermalling
-
• Wide speed
range
Watch
the video here......
The Cularis can be
built as a glider or electric glider. For the electric version we recommend
the dedicated power set, # 33 2633. With the recommended battery this power
system provides 6 to 8 climbs to around 150 m on a single charge. If you want
more power, simply fit a larger propeller (e.g. 12 x 8” or 13.5 x 7”);
this gives a better rate of climb at the cost of reduced motor run times. The
set also includes a glider nose cone in which an optional aero-tow coupling
can be installed. The model can then be flown as a glider and launched by
aero-tow. The MAGISTER makes a great tug for the Cularis.
Cularis - an ideal
model for weekend and club pilots
Innovative
features:
-
The
mechanical retainer system engages automatically when the wings are
plugged in, at the
same time the servos are connected electrically, eliminating the tedious
task of connecting
the wing-mounted servos.
-
The
all-moving tailplane is also removable, with an automatic retainer system.
Design features:
-
Two carbon
wing spars for ample strength
-
Like the
all-moving tailplane, the wings can be unlocked and removed very simply,
making
transport straightforward
-
GRP
reinforcements in the fuselage and tailplane
-
Polycarbonate fuselage nose reinforcement
-
Wing-mounted servos covered by protective fairings
-
All the
electronic components have a pre-defined position in the model.
|
Kit
contents:
-
Moulded
ELAPOR components
-
CFRP and
GRP spars
-
Injection-moulded
parts including motor bulkhead
-
Small
items and linkage components
-
Decal
sheet
-
Comprehensive
illustrated building instructions
Replacement
parts, Cularis
-
Fuselage
shells +
snakes
# 22 4208
-
Canopy
# 22 4209
-
Wings +
spar
tubes
# 22 4210
-
Tailplane
# 22 4211
-
Fin
# 22 4212
-
Small
items
set
# 22 4213
-
Swivel
pushrod connector, pack of 2
# 70 3455
-
Servo
fairing
(pair)
# 72 4382
-
Decal
sheet
# 72 4437
-
Canopy
Lock (2
pairs)
# 72 5136
-
Propeller
driver, blade holder and spinner # 73 3183
-
Two
folding propeller blades, 12 “ x 6”
# 73 3173
|
Recommended
equipment:
| 4 x
Nano-S servo (UNI) Deal
price |
£40 |
 |
| 2 x
Tiny-S servo |
£25.98 |
|
| “Cularis”
cable set (Contents:
2 UNI
extension lead 60 cm, 4 UNI
extension lead 40 cm, 1 Mini
switch harness (UNI / MP-RC) with charge socket) |
£21 |
|
Additional
recommended equipment, glider version
Additional
recommended equipment, electric glider version
-
“Cularis”
power set - Himax
3522-0700 motor, prop & Castle Creation 45A speed control # 33 2633
|
£110
|
-
LiPo
battery: LiBATT BX 3/1-2100 (for power system) # 15 7131
-
PERMABATT
NiMH receiver battery, 4/1800-AA-2L (MP) # 15 6010
|
|
