• Cularis
• Twister
• Gemini
• AcroMaster
• Easystar
• Easyglider
• Funjet
• MiniMag
• Twinstar II
• Blizzard
• Easycub
• Mentor
• Parkmaster
• Fox

Twister #21 4222

                  

Available NOW!                         £ 125.00      

Turbine-powered model aircraft are steadily gaining in popularity, but many modellers are not prepared to pay the price of a small car to get one into the air. The Twister is of ELAPOR® foam construction, and gives you all the “turbine” fun you could desire for little more than pocket-money. Smooth high-speed flying, as befits the model type, broad jet-style aerobatics and attractive looks - these are the Twister’s outstanding features. Safe hand-launching characteristics were an important requirement at the design stage. This is a characteristic which can by no means be taken for granted with EDF (electric ducted fan) models, but we have achieved excellent results by combining a low wing loading with a careful choice of wing section. Although the Twister’s flying characteristics are docile and the landing speed is low, the model is only suitable for pilots with some experience of similar models.

Watch the video here......

• Ready-made moulded components for simple, fast assembly

• ELAPOR® construction for a robust airframe

• Detailed metallic-look surfaces for a visually attractive model

• Plenty of power from an impeller unit developed specifically for this model

• The impeller unit and brushless motor are supplied in the kit assembled,

• Balanced and ready to use

• Once installed, the entire power train is accessible through the

• Maintenance flap.

   

Kit contents: Moulded ELAPOR components  GRP wing spar Small items and linkage components Decal sheet Impeller unit with brushless motor Comprehensive illustrated building instructions   Specification: Wingspan 850 mm Overall fuselage length 1170 mm All-up weight (with 2500 mAh battery) approx. 880 g Wing area approx. 25.5 dm² Wing loading (FAI) min. approx. 31 g / dm² RC functions Elevator, aileron and motor

Recommended equipment, Twister 3 x Nano-S servo (UNI)               # 6 5120 3 x UNI extension lead, 30 cm    # 8 5031 1 x UNI extension lead, 60 cm    # 8 5032 CC Phoenix 45 brushless speed controller # 28 9010 3 x 3.5 mm gold-contact sockets # 8 5211 Li-BATT BX 3/1 2500 battery    # 15 7191 or Li-BATT BX 3/1 3200 battery    # 15 7136   Replacement parts, Twister Fuselage with impeller hatch*   # 22 4223 Canopy*                                      # 22 4224 Wings*                                         # 22 4225 Tail set*                                       # 22 4226 Small items set                           # 22 4227 Tubular spar                                # 72 3128 Swivel pushrod connector, pack of 2 # 70 3455 Servo fairing (pair)                     # 72 4382 Decal set, two-part                     # 72 4469 Canopy Lock (2 pairs)               # 72 5136 *Caution: coloured parts may not match accurately. Twister impeller power set # 33 2570 (included in the kit) DF 69 RTR impeller with Himax A2825-3600, assembled, balanced, ready to use 69 mm Ø impeller with 5-blade rotor Himax A 2825-3600 motor, 3600 rpm / V Current drain with 3S LiBATT battery (10.5 V) 35 A = 367.5 W input power Replacement impeller parts: DF 69 impeller unit # 33 2560 DF 69 impeller unit with intake ring # 33 2561 Rotor and spinner for DF 69 impeller # 33 2562 Driver with accessories for DF 69 impeller # 33 2563 Himax A 2825-3600 # 33 3042