|
PROFI Car 301, 403 &
707
....Burn Rubber!
Just like being
in the driver's seat!
The racing car driver
must have accurate, lightning-fast reactions, and he has to keep one eye
on the track and the other vehicles at all times. His tailor-made cockpit
supplies all the information he needs without distracting him from the
essentials. A good model car transmitter must be designed in exactly the
same way |
Maximum
Comfort!
The PROFI car transmitter
has been sculpted into its unusual shape in order to fit the human hand
and its natural movement processes. At the development stage we placed
top priority on optimum placement of the controls and perfectly harmonized overall balance. |
Instant Information!
The unit lies snugly
in the hand, and all the trims and other controls can easily be found “blind”,
exactly where your fingers fall. The screen is angled towards your eyes,
so that you can instantly take in the information. The transmitter provides
audible warnings of important data such as zero settings and maximum trim
travels.
|
Maximum adjustment
facilities
The PROFI car transmitter
features a set of function buttons which make it very easy to program and
adjust.
Each of these buttons
selects a particular range of adjustments. Just press the appropriate button,
e.g. steering, and you have access to all the adjustment facilities which
are available for that function. When you select the function, you are
returned to the menu you last used. It could hardly be more direct.
Faster control response!
In either AM or FM
mode, the Profi Car transmitter communicates with the receivers at 60 hz
pulse frequency, 50% faster than other car transmitters. This means your
car will respond faster to your commands with the Profi Car transmitter. |
|
|
|
|
Truck mode (Not 301)
In this mode the PROFI
Car system provides control of up to 7 functions. This is possible as the
digi-trimmers around the wheel are converted by the software into function
switches. This arrangement provides plenty of functions even for quite
complex trucks, and the controls are convenient and easy to operate.
At the receiver end
we recommend the MULTIswitch 2/1, # 7 5886, for the switched functions.
|
 |
Convenient adjustment
controls
Adjustment values
are changed via the thumb-operated digi-adjustor fitted in the handle.
General Adjustments
-
Modulation - AM - FM -
IPD
-
Trim button sensitivity
range 0.5% and 3%, in 0.5% increments
-
Application for Ch 3 -
3-position switch, flasher, prop. channel
-
Trim rocker assignment
-
Mode select 6 different
control modes available (7 on 707).
-
Battery threshold, variable
from 6.8 - 7.2 V
Lap Timer
-
Nominal time
(optional sec / 10
sec / min)
|
Throttle &
Brake
-
Throttle exponential (301 &
403)
-
Disengaged / Engaged /
Lock brake points
-
Idle / Start / Full throttle
points
-
Servo reverse
-
Servo format (MPX/UNI)
Additional features on
the 707
-
No. of servos
-
1 throttle/brake servo
-
1 throttle, 1 brake servo
-
1 throttle, 2 brake servos
-
Lock point and engage
point for 2nd brake servo
|
Steering
-
Exponential (+/- 100%)
-
Servo travel (min, centre,
max)
-
Servo reverse
-
Servo format (MPX/UNI)
-
On the 707 you can also
adjust:
-
No. of steering servos
(1/2)
-
For 2nd servo: travel,
reverse and format
|
Memory Management
|
| Features; |
301 |
403 |
707 |
| Channels |
3 |
3 |
5 |
| Channels in truck
mode |
N/A |
7 |
7 |
| Model Memories |
3 |
6 |
12 |
| AM/FM Switchable |
Yes |
Yes |
Yes |
| Individual servo adj |
Yes |
Yes |
Yes |
| Traction Control |
- |
- |
Yes |
| Auto Dual Rates |
- |
Yes |
Yes |
| ABS Brake System |
- |
- |
Yes |
| Electronic Steering
Damping |
- |
Yes |
Yes |
| Expo Steering Curve |
Yes |
Yes |
Yes |
| Expo Throttle Curve |
Yes |
Yes |
Yes |
| Expo Brake Curve |
Yes |
Yes |
Yes |
| Variable Steering
Travel |
Yes |
Yes |
Yes |
| Stopwatch |
Yes |
Yes |
Yes |
| Timer with 50 lap
memory & Nominal/actual time comparison |
- |
Yes |
Yes |
| Auto Timer Start |
- |
Yes |
Yes |
| Audible Battery Alarm |
Yes |
Yes |
Yes |
| Available Frequencies |
40
& 75MHz |
40
& 75MHz |
40
& 75MHz |
Set Prices
Currency
Converter
|
Profi Car 301 |
The low cost entry
level set
|
Profi Car 301
Transmitter only
1 PROFI Car 301 V2.0 Transmitter
with HFMS-car Synthesizer module and 6/600 mAh battery
40 Mhz £122.50

|
|
|
|
|
NEW!
|
Now In!
|
|
Profi Car 301
Racing Synth Set
1 PROFI Car 301 V2.0 Transmitter
with HFMS-car Synthesizer module and 6/600 mAh battery
1 RX-5 SYNTH IPD Car 5 channel receiver
1 x Mini HD servo
1 x Tx charge leads
40 Mhz £149.99 
|
|
|
Profi Car 403
|
|
Profi Car
403 Synth Tx only
1 PROFI Car 403 V2.0 Transmitter
with HFMS-car Synthesizer module and 6/600 mAh battery
40 Mhz £129.99

|
 |
|
|
|
|
Profi Car 403
Racing Synth Set
1 PROFI Car 403 V2.0 Transmitter
with HFMS-car Synthesizer module and 6/600 mAh battery
1 RX-5 SYNTH IPD Car 5 channel receiver
1 x Mini HD servo
1 x Tx charge leads
40 Mhz £178.99

|
|
|
|
|
|
Profi Car 707
|
|
Profi Car 707
Tx only Synth Set
1 PROFI Car 707 V2.0 Transmitter
with HFMS-car Synthesizer module and 6/600 mAh battery
40 Mhz £175!!!

|
|
|
|
|
|
The
PROFI CAR HFM-S-Car Synthesizer
module can be used
with
all PROFI CAR
transmitters which
feature software
version 2.0. The
module requires no
transmitter
crystals at all:
the channel is
selected in a
Channel Select
menu. The
transmitter
automatically initializes
the PROFI
CAR HFM-S-Car
Synthesizer
module when you
switch the
system on.
Selectable
channels / frequencies:
Channel
41 / 40.575 MHz ...
Channel
59 / 40.785 MHz
Channel
81 / 40.815 MHz ...
Channel
92 / 40.985 MHz
Channel
400 / 41.000 MHz ...
Channel
420 / 41.200 MHz
Caution:
transmitters may only
be operated on the
channels /
frequencies which
are approved
for your country.
Before using
the equipment
check the
regulations which
apply where
you operate your
models.
AM
operation is not possible with
the PROFI CAR
HFM-S-Car Synthesizer
module!
|
 40 Mhz
£89.99

Also see
our 5ch car synth receivers!
|
| PC software
with adaptor lead for COCKPIT MM
This PC program allows you to
transfer model settings from the
COCKPIT to a PC and back again.
The software uses the user-friendly
Windows operating system, and all
settings are shown in a clear form
on-screen, where they can easily be
changed. With this set you can:
• Swap data between two
COCKPIT MM
• Back-up data on your PC
• Store model data on your PC, if
you run out of model memories
in your transmitter
System requirements:
IBM compatible PC, minimum 486/
33 MHz, Windows 95 operating
system or later, 1 free serial port
Set contents:
CD-ROM,
Adaptor lead,
Operating instructions
PC software
with adaptor lead
£30.00 |
 |
|
Transmitter
Specifications
-
Functions:
-
Profi
Car 301 : 3 Channels
-
Profi
Car 403 : 3 Channels
-
Profi Car 707 : 5 Channels (7 channels in truck mode)
-
Weight:
-
including
battery, approximately 21 oz. /600g
-
Size:
-
6.9" x 8.3"
x 3"
-
Transmission Mode:
-
Switchable
AM or FM, with 60 Hz pulse frequency for 50% faster reaction than other
car radios
-
Power
Supply:
-
7.2v/AA
Cells, 600 mAh (1000mah optional)
-
Current
Drain:
-
approximately
180 mA
-
Pulse
Width:
-
Variable
for each servo, (1.5/1.6ms)
|
|