• Cockpit
• Profi Car  
• Profi-4000 
• Royal EVO   

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Cockpit MM
with V2.0 Software!

The perfect choice for the sports pilot!

The system for...

The beginner who wants a little bit more and wants to keep all the options open - even the helicopter option!

The sports pilot who wants to operate all his current models and wants value for money!

The expert who needs a good backup system!

 
What the Cockpit MM has to offer
The essentials... 
• Up to 7 channels, 4 as standard, 3 add on options.
• Screen display showing numeric values and plain text in English.


• Travel adjust on all channels
• Dual rates for elevator, rudder and ailerons
• 9 model memories!
• Pupil mode
• 13 ready made mixers, grouped according to model type - fixed wing & helicopter.
• Variable mixer imputs and direction
• Stopwatch with alarm
• Operating time display

Now includes new V2.0 software!
Featuring;
• Electronic Y-Lead - in the UNI model type.  This passes any servo signal from ch 1-6 to ch 7 as well as the standard channel, and allows you to adjust travels and direction independently of the primary servo.  Ideal for CROW/BUTTERFLY modes.
• Revised heli programme - for helis with 3 point 120deg swashplate.
• Expanded stopwatch function - can now be switched or coupled with the throttle function to monitor motor run time.

If you have a Cockpit MM set with the V1.0 software, it can be upgraded to the V2.0. for £30.  However, you will need to send the Tx back to us for return to MPX. 
 

The details

• Up  to 7 proportional channels;

The Cockpit MM 4 channel transmitter has 5 wells above the sticks to accept various modules.  Three of them are designed for function switched e.g.. dual rates, Combi Switch or Stopwatch.  Two wells are reserved for channel expansion either switches or adjusters.
 
• Digital Trims;

The Cockpit MM has convenient digital trims i.e.. each time you press the trim lever briefly, the trim is offset by one increment.  The trim is displayed on the LCD screen in bar graph form for all four stick axis
 
• Trim Values Automatically Stored

When you switch the set off or change to a new model, the trim settings are automatically saved and restored when you next access that model.
 
• 3D digi-adjustor for easy programming;

All adjustments are made using the LCD screen and an easy to use adjustment knob - it couldn't be easier!
 
• 9 model memories;

Easy storage of 9 different model adjustments, settings, mixers and trim.  You could also use this for changing the settings for the same model using the copying mode.  Also, you can use your PC to store the data in a model archive in case 9 models are not enough!  PC archiving has never before been used in a radio of this class before.
 
• Seven menu points take you quickly to the part of the program you need;

Simply rotate the 3D digi-adjustor to select the menu you need, then press to call it up instantly. It is similar to a computer mouse.
 
• 13 ready made mixers;

All mixers are variable in both input and direction.  They are grouped according to the type of model you want.

Sets

Other radio options (different servos etc.) are available - call for a quote

International Set '99;  NOW INCLUDES FULLY EXPANDED TX! incl. 3 servos all uni plug, Micro 7 receiver, switch, 1500mAh NiMH transmitter & receiver batteries, crystals & mains charger Ideal for most power models  Currency Converter 35, 40/41MHz £235.00 Special Offer - £215.00 PC adaptor lead for COCKPIT MM CD Rom not included - download the programme here This PC program allows you to transfer model settings from the COCKPIT to a PC and back again. The software uses the user-friendly Windows operating system, and all settings are shown in a clear form on-screen, where they can easily be changed.  With this you can: • Swap data between two transmitters • Back-up data on your PC • Store model data on your PC, if you run out of model memories in your transmitter System requirements: IBM compatible PC, minimum 486/ 33 MHz, Windows 95 operating system or later, 1 free serial port   PC adaptor lead  £28.50 Downloadable Simulator lead available - click here! 'Rubber Duck' stub aerial An ideal solution for restricted areas.  Please note - will result in a loss of range. 35 or 40MHz  £25.99  Crystals Please state which channel number you require, if you have a preference, in the ADDITIONAL INFORMATION box of the order form.  Please note, there is no such thing as a 'less popular' channel, not in my experience 35Mhz (Aircraft) Transmitter Crystal £9.50 Receiver Crystal £9.50 Pair of Crystals £18.00 40Mhz (Surface Vehicles) Transmitter Crystal £9.50 Receiver Crystal £9.50 Pair of Crystals £18.00

Transmitter Only FULLY EXPANDED! 35, 40/41MHz £125 EXTRA Special Offer!!! - £110.00           Vario Set;  incl. Pico 5/6 receiver 1500mAh NiMH transmitter battery. (No crystals) Ideal for modeller with their own ideas or kit  Currency Converter 35 or 40MHz £135 Add-On hardware includes; NEW! - Trainer Lead Can be used for Picoline to Picoline, Cockpit to Cockpit or Picoline to Cockpit! £17.99    Switches     Slider switch £9.99 On/Off switch £9.99 Rotary  switch £9.99 On/Off/On switch £9.99 Pico-Line Auto Charger £23.99   Transmitter & receiver charge leads £12.50 Channel Check Don’t miss out on this option, because with Channel-Check you can be certain that the channel for your model is actually vacant when you launch! If your channel is free, the LED glows green and the transmitter starts to transmit. If your channel is in use or interference is detected, the LED glows red and the transmitter does not transmit. The Channel-Check module is simply plugged into the RF module Channel-Check 35 or 40MHz  £29.95  Transmitter Tray A low cost tray for the PICO Line transmitter, so you can easily set up the system as a comfortable light weight unit. Set Contents; Carbon Look Tray Support Bars Neckstrap Small Hardware Items   Transmitter Tray £22.99