|
Back
in the early nineties, Multiplex was the first company in the world to produce
servos with a digital amplifier - the MC range.
The improved MC/V2
range has been on the market for 6 years and has gained a superb reputation
amongst competition and championship modelers in all aspects of RC modeling.
The 'Red Ones' are
acknowledged to be the top quality servos and have almost universal acclaim.
In addition to their
programmability, it is the enormous holding power of Multiplex Digi servos that
has gained them their reputation.
With improved
technology, the new Digi range is the third generation of servos with a digital
amplifier, but without the advanced programmable features that are not always
required.
The outstanding
characteristics are as follows;
- SDA (Smooth Drive
Algorithm) for silky smooth running.
- High resolution
for maximum control precision.
- High holding power
with very small angular error for super direct control.
- Integral
temperature control.
- Low current drain.
- Proven mechanical
systems.
AND
- Super
price/performance ratio!
POLO digi-4
All-purpose digital
servo; part of the new MULTIPLEX digi4 range of digital servos.
This is a 13 mm
class servo intended for many applications such as fuselage servos in models
with narrow fuselages, wing-mounting servos and electric helicopter servos up to
about the 16-cell category.
Robust
construction, ballraced output shaft and metal gears ensure good shock
rejection. Digital technology provides high holding power combined with minimal
angular error and accurate repeat positioning for maximum precision of control.
£33.99
£29.99
UNI only
Super FL Digi
Discontinued
Power Digi
The ideal choice for large models eg.For F3X and 1/5th car throttle/brake
NEW PRICE REDUCTION! £49.99
UNI
Power
Speed Digi
As above but faster!
NEW PRICE REDUCTION! £49.99
UNI
Micro Digi
Discontinued
Micro High Speed
Digi
Same as above, but faster.
£39.99
UNI
Royal Digi
This servo with plastic
gears is suited for many functions within Helicopters, cars and power models.
£37.50
Profi Digi
A versatile servo for the more
demanding application. Robust, powerful and fast.
NEW PRICE REDUCTION! £39.99
UNI
Profi Speed
Digi
As above but faster!
NEW PRICE REDUCTION! £39.99
UNI
Jumbo Digi
Extreme power for special
situations.
NEW PRICE REDUCTION! £69.99
UNI
Jumbo
Speed Digi
As above but faster!
NEW PRICE REDUCTION!
£69.99
UNI
Servo Master
A practical, low cost programming
and test device which should be a fixture in every model workshop. Servo
signal genorator for UNI (1.5+/-0.5ms) and MPX (1.6+/-0.55ms) servos.
Provides a quick, simple method of adjusting and testing servos, speed
controllers etc. without requiring the Tx and Rx systems. Continuous servo
operation for test or demo purposes. Also a programming device for the Digi range
of MPX servos, for changing the rotation direction. Accepts
MPX and UNI connectors and runs from a 4 or 5 cell battery.
£19.99
UNI & MPX
|
TIGER
MG Digi 4 servo
High-quality 20 mm digital servo. Identical to the Tiger
MG servo, but with digital technology for maximum accuracy and holding power,
and optimum running characteristics.
• heavy-duty metal gearbox
• two ballraces
• aluminium heat-sink
• high-quality cable of large cross-sectional area (0,33 mm2), with
gold-plated connector contacts
• heavy-duty plastic output lever supplied as standard £45.99
UNI only
TIGER
Karbonite servo
High-quality
20mm class analogue servo.
High performance standard analogue
servo in the 20mm class offering outstanding value for money. Tiger
KARBONITE is a fast, strong servo for many applications, with those who
demand accuracy and minimum gear transmission play (e.g. 30 - 60 size
helicopter, powered flight models to 90 size).
The KARBONITE technology is
extremely wear resistant when compared to conventional plastic gearboxes.
This results in a high gear life span with durably and minimum gear wear.
However, with high shock loads (e.g. steering on RC Cars, large-scale models
with large, heavy rudders) a servo with metal gears is preferred.
£23.99
UNI only
TITAN
MG digi 4 servo
High-quality
20 mm class digital servo.
The
TITAN MG digi is based on the proven TITAN digi servo, but features an
ultra-robust metal gearbox. The gearbox is optimised for maximum torque, as
the servo is designed primarily for use in models where high shock resistance
and great power are required, combined with good transit speed. Typical
applications are the steering servo in RC model cars, power models
(F3A-X),helicopters (swashplate), model jets, etc.
£69.99
UNI only
TITAN digi-4
High-quality 20 mm
class digital servo.
The TITAN digi4 is
designed for demanding applications, especially in fixed-wing model aircraft
and helicopters, and also in model cars and boats.
The gearbox
incorporates the very latest technology based on a high-strength plastic
called KARBONITE. Compared to conventional plastic gears this construction is
much better at surviving shock loads without damage. At the same time the
gearbox is extremely accurate and virtually devoid of slop. Conventional
plastic gear-boxes tend to wear out fairly quickly, but KARBONITE gears are extremely
durable, guaranteeing a long useful life. In conjunction with the new,
high-resolution MITSUBISHI IC and high-performance bell armature coreless
motor the result is very high accuracy of control. The TITAN 4 is truly a
High-End servo.
£62.50
UNI only -
RHINO digi-4
A super strong
Digital servo suitable for 1/5th cars and large models. HUGE power - up
to 320Ncm holding power!
29
mm digital servo for use in large-scale models. 1 :5 scale model cars place
extreme demands on their servos. The RHINO digi features a generously
dimensioned metal gearbox with a steel output gear and 8 mm splined output
shaft. The integral aluminium heat-sink provides effective cooling of the
motor and electronics. The servo case is fitted with sealing rings to prevent
the ingress of dust and spray.
The
enormous torque and rugged construction of this servo also make it an
excellent choice for large scale aircraft such as F3A-XXL type
Metal gears, 3
ballraces and a big cooling unit.
£69.99
UNI only -
SLIM-STAR FL
digi servo
New design of
digital servo for wing-mounting. Specifically designed for installation in
gliders and electric-powered models with extremely thin wings:
10 mm class
wing-mounting servo: can be installed in wings with very thin sections.
-
SLIM shape.
Extremely slim design: only 23.5 mm wide, minimises the weakening of the
wing structure due to servo installation.
-
Output lever
supported on both sides. Significantly higher forces can be transmitted
with greater precision compared to servos of conventional construction.
-
Mounting
components supplied as standard. Specially developed mounting parts
included in the set: for installation in conventional sheeted foam wings
as well as hollow-shell panels.
£44.50
UNI Only
|
