• Cularis
• Twister
• Gemini
• AcroMaster
• Easystar
• Easyglider
• Funjet
• MiniMag
• Twinstar II
• Blizzard
• Easycub
• Mentor
• Parkmaster
• Fox

.....3D indoors or outdoors!!

Design:   Martin Müller

Parkmaster 3D   #214231  DUE IN APRIL

                         £ 69.99         Nothing charged until in stock!

This model can be flown in very small spaces in any public park or sports field (obtain permission beforehand), and was designed and developed by Martin Müller - multiple German Indoor Aerobatics Champion. The model is produced from ELAPOR® using accurate metal moulds, making it tough and extremely practical for everyday flying. The PARKMASTER 3D can also be flown outdoors in moderate wind - something which is not possible with typical indoor models (“shockies”). The strong ELAPOR® foam airframe enables the aeroplane to fly particularly accurate aerobatics, including knife-edge, rolling circles, stall turns, square loops etc.

Low minimum airspeed Fully 3-D capable, but still with docile handling Carefully optimised power set available (# 33 2638) Can be finished using any standard spray-can paints after prior treatment with MULTIprimer # 60 2700 Pre-fabricated moulded ELAPOR® parts

Recommended equipment: 4 Nano-S servos, 2 x ail., 1 x elev., 1 x rudder # 6 5120 1 Extension lead, 15 cm # 8 5019 1 Receiver, e.g. RX-6-SYNTH light # 5 5876 1 PARKMASTER 3D power set # 33 2638 1 Flight battery, Li-BATT BX 3/1-950 # 15 7116 Kit contents: Moulded ELAPOR® parts, CFRP and GRP spars and fuselage longerons, all plastic parts required to assemble the model, small items and linkage components, decal sheet, comprehensive illustrated instructions.

Specification:   Wingspan 980 mm Overall length 1000 mm All-up weight approx. 580 g Total surface area 29 dm² Wing loading min. 20 g/dm² RC functions Aileron, elevator, rudder, throttle

Power set       £64.50 Himax C2816-0860 Brushless Motor BL17/II Speed Control Prop Driver

Nothing charged until in stock!