Now you can add colour!
Until now it has been virtually impossible to paint ELAPOR® or EPP foam, as the paint’s adherence was very poor. At last the situation has changed - with MULTIPrimer. Once primed, the surface provides a strong bond with many types of paint, and a further advantage can be obtained on foam by fi nishing off with a coat of matt clear synthetic enamel or acrylic lacquer (available in spray cans from any DIY supplier). Important note: apply the primer extremely sparingly with a piece of sponge, as if you just wanted to wipe your model clean. Apply the colour finish in multiple thin coats.