PARKMASTER … fly aerobatics outdoors - just like you do indoors!
This model can be flown in very small spaces in any public park or sports field (obtain permission beforehand), and was designed and developed by Martin Müller - multiple German Indoor Aerobatics Champion.
The model is produced from ELAPOR® using accurate metal moulds, making it tough and extremely practical for everyday flying.
The PARKMASTER 3D can also be flown outdoors in moderate wind - something which is not possible with typical indoor models (“shockies”). The strong ELAPOR® foam airframe enables the aeroplane to fly particularly accurate aerobatics, including knife-edge, rolling circles, stall turns, square loops etc.
• Low minimum airspeed
• Fully 3-D capable, but still with docile handling
• Carefully optimised power set available (# 33 2638)
• Can be finished using any standard spray-can paints after prior treatment with MULTIprimer # 60 2700
• Pre-fabricated moulded ELAPOR® parts
Items Required
-
4 x Nano-S servos
-
For Top Spec, use 4 x Nano Karbonite servos
-
Reciever
-
Power sets - Himax C2816-0890 Brushless Motor, BL17/II Speed Control, Prop, Driver
Kit contents
Moulded ELAPOR® parts, CFRP and GRP spars and fuselage longerons, all plastic parts required to assemble the model, small items and linkage components, decal sheet, comprehensive illustrated instructions.
Specification
Wingspan 980 mm
Overall length 1000 mm
All-up weight ca. 520 g
Total surface area 29 dm²
Wing loading min. 18 g/dm²
Functions Aileron, elevator, rudder, throttle
