A/C Kits Boat Kits
Accessories Electrics
Com Vehic. Chargers
Radio Sets Motors Servos
|
Comtesse
£120
Currency
Converter
RADIO
CONTROLLED MODEL YACHT
With its streamlined
hull and integral keel fin the elegant Comtesse is capable of impressive
speeds in light winds, but even in stronger breezes the keel layout makes
the model unsinkable. The Comtesse’s balanced handling makes the task of
trimming the boat much easier, especially if you are a newcomer to model
boats. You can tack, gybe, go about, in fact, carry out any maneuver just
like the full-size. The boat is controlled by rudder and sail setting of
mainsail and jib, so only a two channel radio control system is required.
Ready-made Plura hull and fully pre-fabricated parts for fast building.
Kit
contents:
• One piece moulded
Plura hull (no joining of hull and deck required) with integral keel fin,
• Vacuum-moulded
cockpit,
• Die cut internal
hull formers and sliding hatch,
• Ready-made plastic
rudder and shaft,
• Factory-sewn
sails, one piece aluminum mast, aluminum booms,
• All fittings
for sailing rig,
• Detailed building
instructions and plan
Accessories:
•Fittings set
(railings, wheel, life belts ect):
No. 1073 £24.99
•Sail servo: for
sail setting No. F 1102
•Rudder servo:
S 3003 No. F 1259
•Wing keel: No.
1071 £24.99
•Ballast: Lead
shot, 1 kg, 2 x No. 5110
•RC system .Any
robbe-Futaba RC system with 2 or more channels
|
Checklist
- everything you
need to complete! |
| Comtesse
Kit |
| Fittings
kit #1073 |
| Sail
arm servo or sail winch servo |
| 2
channel radio set with 1 servo |
| Lead
ballast |
| Stablit
Express Glue |
|
Specification:
Hull
length: 950 mm (37.4 in)
Beam:
230 mm (9.1 in)
Draught:
approx. 210 mm (8.3 in)
Overall
height: 1500 mm (59.1 in)
Mast
height: 1200 mm (47.2 in)
Sail
area: approx. 30 din2 (4.7 sq.in)
Overall
displacement: approx. 3.2 kg (7.0 lbs)
Ballast
weight approx. 1.8 kg (4.0 lbs) |
|
