|
|
|
Aircraft
Controllers
|
|
£24.99 
|
|
A small, lightweight speed
controller with forward / stop functions, designed for 400 motors
and moderate usage of AP 29 and Speed 480 motors.
Many small models do not require a brake, for example power models
or models with direct drive and non-folding propellers.
Specifications:
Dimensions: 31 x 21 x 9 mm
Operating voltage: 6-10 cells
Load current: 18 A
|
For such applications we
recommend the use of the air control 118 as it is smaller, lighter
and cheaper than a braked controller. Also an excellent choice for
model boats and controlling auxiliary functions. The speed
controller incorporates an integral Schottky freewheel diode.
|
|
|
|
|
£26.99
|
|
|
A small, lightweight speed
controller with forward / brake functions, designed for 400 motors
and moderate usage of AP 29 and Speed 480 motors. The powerful
continuous brake ensures that the blades of the folding propeller
fold back reliably.
Specifications:
Dimensions: 32 x 21 x 8.5 mm
Operating voltage: 6-10 cells
Load current: 19 A
|
The integral ´Rx-Filter´
active interference suppression system shields the receiver from
motor interference and suppresses invalid signals. The high pulse
frequency of 1.5 kHz provides smooth motor starting to prevent
damage. Schottky freewheel diode supplied in set.
|
|
|
|
|
£35.99
|
|
|
Small, lightweight speed
controller with forward / brake functions, designed for 500 and 600
size motors, or multi-motor operation of 2...3 motors of the 400
size. The powerful continuous brake ensures that the blades of the
folding propeller fold back reliably.
Specifications:
Dimensions: 32 x 21 x 8.5 mm
Operating voltage: 6-10 cells
Load current: 30 A
|
The integral ´Rx-Filter´
active interference suppression system shields the receiver from
motor interference and suppresses invalid signals. The high pulse
frequency of 1.5 kHz provides smooth motor starting to prevent
damage. Schottky freewheel diode supplied in set.
|
|
|
|
|
£49.99
|
|
|
Mini-sized high-performance
speed controller with forward / stop / brake functions, for
500...700 size motors or multi-motor models with 2...3 400-size
motors; also for Pro, Sports and Ultra motors with more than 5
turns. The powerful continuous brake ensures that the blades of the
folding propeller fold back reliably. Broad voltage range of 6-14
cells combined with a Super-BEC system for up to 4 servos.
Specifications:
Dimensions: 40 x 26 x 7.5 mm
Operating voltage: 6-14 cells
Load current: 40 A
|
A thermal overload guard
protects the speed controller from overheating. Simple to adjust the
speed controller using the "eps" easy programming system.
The integral ´Rx-Filter´ active interference suppression system
shields the receiver from motor interference and suppresses invalid
signals. The high pulse frequency of 1.² kHz provides smooth motor
starting to prevent damage. Schottky freewheel diode supplied in
set.
|
|
|
|
|
£67.99
|
|
|
High-performance speed
controller with forward / stop / brake functions, for 500...700 size
motors or multi-motor models with 2...3 400-size motors; also for
Pro, Sports and Ultra motors. The 870 is intended for power and
aerobatic models, large-span gliders with powerful electric motors,
and also hot-line models with very ´hot´ motors. The powerful
continuous brake ensures that the blades of the folding propeller
fold back reliably, but can be switched off if required by your
application.
Specifications:
Dimensions: 52 x 36 x 11 mm
Operating voltage: 7-30 cells
Load current: 70 A
|
Galvanic separation (OPTO)
between motor and receiver power circuit prevents interference to
the receiving system from brush sparking. Thermal overload guard
protects the system from overloading. Simple to adjust the speed
controller using the ´eps´ easy programming system. The integral
´Rx-Filter´ active interference suppression system shields the
receiver from motor interference and suppresses invalid signals. The
high pulse frequency of 1.2 kHz provides smooth motor starting to
prevent damage.
|
|
|
|
£22.99
Relay switch with
SMD technology. OPTO galvanic separation effectively blocks interference
produced by motor circuit. EMF (BRAKE) function is also available or folding
propellers.
Specifications:
Dimensions: 42 x35 x 22 mm
Operating voltage: 4-25 Volt (3-20 NC)
Load current: 50 A
|
|
|
|
|
£22.99
Very small, lightweight
relay switch for 400 size motors. Round shape allows it to be fitted directly
to a POWER 400 motor back side.
Specifications:
Operating voltage: 7.2-9.6V (6-8 NC)
Load current: 10 A
Dimensions: ~ 32 x 26mm
Weight with lead: 26 g ( .9loz.)
Features: BEC PCO FOR
|
|
|
|
|
£21.99
Very small, lightweight
relay switch. Switching power (is A) is sufficient for
500 and 600 Power
series with direct drive. BEC receiver power supply.Motor suppression and
may be operated with or without EMF brake function.
Specifications:
Operating voltage: 8.4 V (7NC)
Load current: 15A
Dimensions: 37 x 28mm
Weight: 27 g.( .95 oz.)
Features: HOC PCO POR
|
|
|
|
|
£49.99
Electronic on-of
switch for 7-cell pylon racers or electric gliders. Features: soft switch,
HOC, TP, PCO, BRAKE, POR. Also for electric motors with a maximum current
consumption of 35 A. HOC voltage: 5 volts max., 1.5 amps.
Specifications:
Operating voltage: 7.2-14.4V (6-12 NC)
Load current:: 35 A
Dimensions: 43 x 27 x 10 mm
Weight: 329(1.12 oz.)
Features: BEC, PCO, POR, TP
|
|
|
|
|
£44.99
Fully electronic
high-performance unit with soft start, for electric gliders powered by 7
- 8 cells. EMF brake function ensures that a folding propeller folds back
reliably once the motor has been switched off. Integral BEC system, PCO low-voltage
monitor and power on reset
Specifications:
Operating voltage: 7.2-14.4V (6-12 NC)
Load current: 25 A
Dimensions: 43 x 27 x 10 mm
Weight: 32 g (1.12 oz.)
Features: BFC, PCO, POR, TP
|
|
|
|
|
| 2/3 channel motor
switch Order No. 8274 |
£27.99
Small, lightweight
relay switch for 400- 600 motors. Allows motor control even with 2-channel
RC system without effecting elevator and rudder control: brief rudder stick
movement 2 times full left to full right switches motor on; repeat movement
switches off again.
Specifications:
Dimensions: approx. 40 x 30 x 16mm
Weight: approx. 35 g (1.23 oz.)
Operating voltage: 8.4 V (7 NC)
Load current: 15 A
Features: BEC, PCO, POR
|
|
|
|
|
|
|
|
|
|
MOTOR CONTROLLER SERIES
The latest generation of microprocessor driven speed controllers. A microprocessor
automatically monitors and controls all safety functions available in these
controllers without requiring the operator to make any settings. |
Functions are:
hec (high efficiency clock]
PCO (Power Cut Off)
POR (Power On Reset]
TOP (Thermal and Overload Protection) with intelligent current limiting
TP Thermal protection |
|
|
£69.99
New light weight
and small size high performance motor controller, for Power 500 - 700, 2
x 400 or Sports series motors with more then 5 turns.One of the smallest
up to 40 amps motor controller you can buy.With intelligent current limiter,
which can detect a real short dr-cult or an overload from motor side.One
motor controller fits more than 8O% of all applications.
Specifications:
Operating voltage:
with BEC: 7.2 -16.8 V (6-14 NC)
w/o BEC: 7.2 - 25 V (6-20 NC)
Drive current: 36 I 50 A
Dimensions: 43 x 28 x 11 mm
Weight: 39 g (1.37 oz.)
Features: BEC, PCO, POR TOP, hec, Brake
|
|
|
|
|
£52.99
New mini format speed control ideal for 500-700
size motors or multi engine 400 size aircraft eg MPX Cargo etc.
Specifications:
Operating voltage:
with BEC: 7.2 -16.8 V (6-14 NC)
w/o BEC: 7.2 - 25 V (6-20 NC)
Drive current: 40 I 60 A
Dimensions: 43 x 28 x 11 mm
Weight: 44g
Features: BEC, PCO, POR TOP, hec, eps, Brake, Rx filter.
|
|
|
|
|
£109.99
Top class speed
controller for model aircraft. Ideal for FAI class F5B competition, with
motors from the PRO Sydney series.
Specifications:
Operating voltage: 8.4 -36 V (7- 30 NC)
Drive current: 90/110 A
Dimensions: 53 x 39 x 13mm
Weight: 68 g (2.4 oz.)
Features Opto, PCO, POR, TOP, hec, Brake
|
|
|
|
|
£79.99
High performance
speed controller for acrobatic models such as the Extra 300, for large model
gliders, or for hotline glider models such as the Calibra. ideal for use with
the PRO series motors. With intelligent current limiter.
Specifications:
Operating voltage: 8,4 -36 V (7- 30 NC)
Drive current: 60/90 A
Dimensions: 53x39x 13mm
Weight: 58 g (2 oz.)
Features: Opto, PCO, FOR
TOP, hec, Brake
|
|
|
|
£109.99
Top class speed
controller for model aircraft. ldeal for FA1 class F5B competition, with
motors from the PRO Sydney series.
Power stage with
extremely low resistance.
Drive current:
110/130 A
Data identical
to RSC 890 |
|
|
|
|
|
|
|
|
The Rookie series are low cost speed controllers with splash-proof construction,
ulta simple to programme, |
Function are:
BEC,
Forward,
Stop,
Dynamic Brake,
Reverse. |
|
|
Top
level speed controller can handle even competition electric cars powered
by hot tuned motors with 11-36 turns (50A). With full reverse stage
for cars and racing boats
£67.50 |
|
|
|
Specialised
controller for model trucks and other multi function vehicles. Expanded
neutral point for ultra fine control and slow start off. Max current
35A. No brake.
£59.99 |
|
|
|
Special
purpose speed control for model boats. Expanded neutral point and the
control curve is non linear, providing fine control around the centre.
35A, no brake.
£59.99 |
|
|
|
Economy
speed control for electric cars. Working range 18-36 turns. 16A
max with brake.
£35.99 |
|
|
|
|
|
Boat
Controllers
|
|
| Navy Control 535R
No.8615 |
£73.99
|
|
|
High-performance speed
controller with forward / stop / reverse functions, for 600...700
size motors or multi-motor models with 500-700 size motors; also for
Pro, Sports and Ultra motors. Full forward / reverse control with
high resolution, excluding unnecessary brake function. Expanded
controller neutral point with pre-programmed non-linear control
curve for finer control when manoeuvring. The 1000 Hz pulse
frequency avoids motor damage and gives a smooth motor start.
Specifications:
Dimensions: 65 x 39 x 18.5 mm
Operating voltage: 6-12 Volt (6-14 NC)
Load current: 35 A
|
Galvanic separation (OPTO)
between motor and receiver power circuit prevents interference to
the receiving system from brush sparking. The integral ´Rx-Filter´
active interference suppression system shields the receiver from
motor interference and suppresses invalid signals. With power-on
guard and thermal overload protection. Simple to adjust the speed
controller using the ´eps´ easy programming system. With integral
water cooling system for long operating times at high load currents.
Can also be used without water cooling; maximum continuous current
is then reduced to 25 A. Sealed with acrylic lacquer to protect from
splash damage.
|
|
|
|
|
£71.99
|
|
| High-performance
speed controller with forward / stop functions, for 600...700
motors, or multi-motor models with 500...700 motors; also for
high-performance power systems based on Pro, Sports and Ultra
motors. Galvanic separation (OPTO) between motor and receiver
power circuit prevents interference to the receiving system from
brush sparking. The integral ´Rx-Filter´ active interference
suppression system shields the receiver from motor interference
and suppresses invalid signals.
Specifications:
Dimensions: 65 x 39 x 18.5 mm
Operating voltage: 8.4 - 36 Volt (7-36 NC)
Load current: 70 A
|
The
high pulse frequency of 1000 Hz provides smooth motor starting to
prevent damage. With power-on guard and thermal overload
protection. Simple to adjust the speed controller using the ´eps´
easy programming system. With integral water cooling system for
long operating times at high load currents. Can also be used
without water cooling; in this case the stated maximum load
current is not a continuous rating but limited to one 2000 mAh
battery charge. Sealed with acrylic lacquer to protect from splash
damage.
|
|
|
|
£99.00
A Standard speed
control for boats with forward and reverse, using up to 14 cells. Integral water cooling
makes it ideal for power or sport series motors.
Specifications:
Operating voltage: 7.2-16.8V (6-14 NC)
Load current:: 35 A continuous, 45A momentary
Dimensions: 59 x 45 x 18 mm
Weight: 87g
Features: POR, TOP, hec, eps, OPTO, water cooling
|
|
|
|
|
Rokraft 120uP WP
No.
8367 |
£54.99
High performance
, low cost controller for model cars and boats of medium to high power.
For example 540 size tuned motors from 13-36 turns or 600/700 power motors.
Sealed with acrylic
lacquer to guard against water spray.
Specifications:
Operating voltage: 6-12V (5/10 cells)
Drive current: 20A
Dimensions: 55mm x 41mm x 13mm
Weight: 50g
Features: Farwards, Reverse, Dynamic Brake.
|
|
