With the introduction of the FX-14 robbe-Futaba sets new standards in the field of computer radio control systems.

Without allowing any compromises, the modern and attractive case design combines in a unique way the requirements of a tray-mounted transmitter and a hand-held transmitter.

The main distinctive feature of this attractive dual-purpose transmitter is the linear slider functions, which are mounted on the front and back of the case.

The system also provides virtually every imaginable function and expansion option you could possibly desire.  

The ideal computer system for the beginner and advanced modeller, catering equally well for model aircraft, boats and cars.

User-friendly three-language software incorporating many new functions, easily and quickly operated using the 3-D HOTKEY.

Ergonomically efficient hand-held transmitter.

The FX-14 is the first hand-held transmitter which gives the pilot the advantages of linear slider channels.

The Tx can be expanded to a maximum of 4 linear sliders.

It accepts multi-Switch modules to expand the Tx to control up to 32 switched channels.  3 different variants are available allowing you to optimize the Tx to meet your personal requirements for trucks and boats. Requires the appropriate decoder unit. See F-14 page

The standard trainer socket for dual control allows the set to be used for both pupil and teacher mode.

Home display can be set to show any of the following;

• Model name and voltage

• Stopwatch and operating time

• Stopwatch and voltage

• Operating time and voltage

• Model memory selection (internal 10 models), can be expanded by up to 65 models per CAMPac module

• Copy model

• Servo travel adjustment (ATV), separately left and right

• Servo reverse

• 3 x Dual Rates (servo travel reduction)

• Exponential function for all sticks

• 3 x freely programmable mixers (V-Mix), with dummy function. Switchable, variable using external mix trimmers.

• 1 x freely programmable dual mixer (X-Mix)

• Servo centre offset (sub-trim)

Parameter menu: includes following functions

• Reset

• Stick mode (throttle left / right)

• D/R switch, optionally individual or common function

• Throttle direction reverse

• Beep (signal tone) on - off

• Language selection: German - English - French

• Asymmetrical throttle trim (ATL)

• Variable threshold for low voltage alarm

• I.C. motor cut from idle, without moving trim

• Stopwatch (count-up, count-down)

• External mix adjustor on - off

Convenient wing mixer with

• Flaperon mixer (flap / aileron mixer), with large travel for flaps

• Switchable aileron differential, can be adjusted in flight using external mix trimmer. Very good aileron control on landing approach with flaps deployed if differential is switched off.

• Variable mixer input for flaps, up and down separately

• Flap offset, alters neutral point of linear slider

• Limit function for flaps

• Receiver output for 2nd aileron, selectable channel 5 / 7

• V-tail mixer

• Selectable flap control: linear slider / switch or throttle stick

• Combi-mixer, aileron / rudder

• Compensating mixer, flap - elevator with limit function

FX Multi-Switch Module lighting set        No. 8372 £75.99

Expansion module for controlling auxiliary functions. Expands two proportional channels of the FX transmitter to provide 32 switched channels. The carefully selected switches are arranged in such a way that they provide optimum control of one Truck and Trailer lighting set. To control all the channels two further switches have to be installed in the transmitter.

This Multi-Module can also control a second Multi decoder, although additional physical controls have to be fitted in the transmitter’s option wells in this case.

Any type of decoder can be used, and the transmitter controls can be set up in any arrangement you like.

Requires decoder.See F-14 page

FX Multi-Switch-Prop module       No. 8380  £75.99

Expansion module for controlling auxiliary working systems. Expands two proportional channels of the FX transmitter to provide up to 32 switched channels. The carefully chosen switches are arranged in such a way that they provide optimum control of one Multi-Switch-Prop decoder. To control the proportional channels two further sliders have to be installed in the transmitter.

Requires decoder.See F-14 page

FX Multi-Switch Sound Module No. 8382  £75.99

Expansion module for controlling auxiliary functions. Expands two proportional channels of the FX transmitter to provide up to 23 switched channels. The carefully selected switches are arranged in such a way that they provide optimum control of a Truck Sound module or Navy Sound module. To control all the channels one additional switch has to be installed in the transmitter.

This Multi-Module can also control a second Multi decoder, although additional physical controls have to be fitted in the transmitter’s option wells in this case.

Any type of decoder can be used, and the transmitter controls can be set up in any arrangement you like.

Requires decoder.See F-14 page

Recommended  accessories:  

• Rear linear slider, long No.F 1585 £12.95

• Rear linear slider, short No.F 1590 £12.95

• Front linear slider  No.F 1587 £10.95

• 3-position switched channel, long No.F 1588 £10.99  

• 2-position switched channel, long No.F 1524 £10.99

• Trainer switch, e.g. No.F 1524 £11.50

• FX transmitter tray No.8373 £44.99

• FX neckstrap set No.8374 £21.99

• FX carry handle No.8375 £13.50