Paula
III
1/25th
scale radio-controlled model of a working ship with salvage crane -
Fittings set and motor included!
In many harbours of the world you will find examples of the full-size Paula III.
These industrious vessels are constantly shunting in and out of port to carry
out their work in the coastal regions, around the estuaries of large rivers and
in the harbour approaches. Maneuverable and very fast for their size, these
working ships are employed for all manner of tasks. Amongst their duties are
retrieving and laying sea warnings and markers, clearing away minor obstacles in
shipping lanes and transporting special equipment required for marine research.
This wide-ranging versatility gives the imaginative modeller almost unlimited
scope for completing and operating the boat.
The Paula III is the ideal model for the beginner and advanced model builder
alike, but is likely to appeal to the traditional modeller who enjoys
"real" construction work. We recommend the use of a lead-acid battery
which gives extremely long running times. The salvage crane can lower various
loads over the model´s stern and retrieve them again.
Crew figures and buoy set not included in the kit.
Kit contents:
- Vacuum-moulded plastic hull and deck
- Vacuum-moulded deck superstructure formed in clear material; windows do
not need to be cut out separately
- Die-cut internal hull fittings
- EF 76 II electric motor
- Complete rudder system
- Stern tube, shaft and propeller
- Shaft coupling
- All parts for the salvage crane
- Decal sheet
- Building instructions and plan
- Complete fittings set
Recommended accessories
for running the boat:
Rokraft 120 speed controller No.
8367 £54.50 
Radio control system
Any 2 channel radio control system.
6V/5Ah lead acid battery -
£25.99 each Also
available - Salvage
crane special function set (requires 3+ channel radio set) £31.50 Buoy
set £15.95 Complete
Starter deal including; Kit, Speed control, Battery, Charger,
2ch Radio set -
everything needed exept glue! £215
|
Checklist
- everything you
need to complete! |
| Paula
III Kit |
| Rokraft
120 Speed Control |
| 6v5A
lead/acid battery |
| 2
channel radio set with 1 servo |
| Stablit
Express Glue |
| Charger |
Specification:
| Length: 710 mm |
| Width: 215 mm |
| Scale: 1:25 |
| Total displacement: 2500 g |
|
