Boat Kits Back to home page Back to Punctilio home page!

A/C Kits Boat Kits
Accessories Electrics
Com Vehic. Chargers
Radio Sets Motors Servos

U-Boat U-2540

Scale model of the type XXI submarine to 1:40 scale for dynamic diving

The U-boat U2540 was built at the Blohm und Voss yard in Hamburg in 1944, and the vessel was commissioned in January 1945. During the crew training phase in early May 1945 the boat was attacked by a British bomber off Fehmarn, and was eventually scuttled by the crew. By this point in history this was a typical fate of the last U-boats commissioned by the German War Navy.

Many years later the infant Federal Republic of Germany had become a member of NATO, and was looking for a suitable vessel on which to base the submarines of the Federal Navy; this was when the fate of the U2540 was recalled: the boat which had lain on the bottom of the sea for 12 years. In 1957 she was raised, brought to Kiel and completely re-built. On 01.09.1960 the submarine was re-christened „Wilhelm Bauer“, and was commissioned into the German Federal Navy.

By Spring 1980 the submarine had completed a long period of service as a training and experimental vessel, and was finally retired. Since 1984 the „Wilhelm Bauer“ has been an exhibit in the German Maritime Museum in Bremerhaven.

The unusual history of U2540 illustrates just how advanced was the design of this U-boat type

The Type XXI boat U2540 Kit

Just like the legendary robbe U47, this model is capable of submerged running using the dynamic method of diving. The model is almost 2 metres long, and consists - like the U47 - of a foreship and aftership joined together by a central screwed joint. When the two parts are separated, the motors and RC equipment assembly can be withdrawn from the pressure vessel. This model also features pre-cut flooding slots to save the modeller the time-consuming task of drilling and/or machining the openings. In contrast to the U47 the forward hydroplanes are controlled by a servo, rather than mechanically by means of a paddle. As an option these forward hydroplanes can be folded in for surface running, just as on the full-size vessel. This is an imposing model which always attracts a large number of fascinated spectators.

1241.jpg (300937 bytes) 1241-1.jpg (209452 bytes)  1241-2.jpg (164215 bytes) 1241-3.jpg (75181 bytes)
 
Kit contents:
  • Pressure vessel consisting of thick-walled plastic tube

  • O-rings and ready-made moulded parts for sealing the pressure vessel

  • Installation plate, can be withdrawn for access to the radio control and power systems

  • Folding mechanism for forward hydroplanes

  • Rubber bellow seals

  • All parts for rudder and hydroplane systems

  • Stern tubes, propeller shafts and propellers

  • Electric motors and suppressors

  • Vacuum-moulded hull and conning tower components

  • Components for cannon and other fittings

  • Pre-cut flooding slots

  • Multi-colour decal sheet

  • Multi-lingual illustrated building instructions and plan

RC functions:

  • Rudder

  • Forward hydroplanes

  • Aft hydroplanes

  • Motor control

  • Folding forward hydroplanes


 

Recommended Accessories;
2 x Rokraft 120 electronic speed control
£54.99 
Click here to go to our order area!
Any 4+ radio set with 4 servos.  Check out the Multiplex or Robbe range
2 x 6V/5Ah lead acid batteries -  £25.99 each   Click here to go to our order area!

Stabilit Express Glue Click here to go to our order area!
 
 

Checklist - everything you need to complete!

U-2540 Kit
2 x Rokraft 120 speed control
6v/5A lead acid battery x 2
4+ channel radio set with 4 servos
Stablit Express Glue
Charger

 


 

Specification:
Length: approx. 1915 mm
Beam: approx. 210 mm
Height: approx. 330 mm
Weight: approx. 12 kg
Scale 1:40
 
 
Please Sign Our Visitors Book!
Punctilio Model Spot Ltd.
1-3 Waterloo Road,
Hinckley,     Leicestershire 
LE10 0QJ    UK
Tel +44 (0)1455 230952
Fax +44 (0)1455 615747 
modelspot@dial.pipex.com