Voltage sensor # 8 5400
Measures voltages up to 60 V (e.g. flight pack / drive battery, ignition battery, turbine battery ...). You can monitor all the safety-relevant airborne voltages in order to have a clear overall idea of the model’s safety situation. If the second measurement channel is activated using a MULTImate (or your PC with Sensor Data Manager), the sensor can measure a second voltage value and pass it on to the transmitter.
.
Contents: voltage sensor with UNI lead
Accessories / replacement parts:
UNI lead (2 x socket) # 8 5056
For connecting the voltage sensor (# 8 5400) to the SAFETY-SWITCH 12 HV
TwinBatt / 12 HV TwinBatt (M6) (# 8 5009 / # 8 5010).
.
Specification:
Measurement range +/- 60 V (2 measurement channels)
Resolution 0.1 V
Dimensions (L x W x H) 38 x 17 x 7 mm
Weight approx. 10 g
| The following can be activated and altered using the MULTImate, or using Sensor Data Manager on the PC: |
| Address |
Address (screen line on transmitter) at which the voltage is displayed |
| Top alarm |
Upper voltage value, above which an alarm is triggered at the transmitter |
| Bottom alarm |
Lower voltage value, below which an alarm is triggered at the transmitter |
| Option |
Additional generation of minimum, average or maximum voltage |
| Address option |
Address (screen line on transmitter) at which the optional value is displayed |
The same applies to the second measurement channel
